IPv6 Help

The IPv6 pages allow you to configure and check the status of your IPv6 Internet connection.

Internet Connection Typee

Select the IPv6 connection type you want to use, which should be provided by your ISP. If your ISP does not provide a specific IPv6 connection, you can select "6to4 Tunnel". If you are not clear about the IPv6 connection, you can select "Auto Detect" and let the router decide the proper type for you.

If your ISP explicitly indicates that your IPv6 connection is not DHCP, PPPoE, or Fixed IP, or your ISP indicates it is IPv6 auto config, you may select "Pass Through".

The default setting is "Disabled", which turns off the IPv6 function.

To Save/Cancel Changes or See the Current IPv6 Status

Click Apply to save the new settings to the router.
Click Cancel to discard any unsaved changes.
Click Status Refresh to update the page and see the information about the current IPv6 connection.