Skip to main menu
Skip to sub menu
Skip to content
Cisco Generic Custom Release Docsis 3.0 Multiservice Gateway
DPC3848
Status
Gateway
Local Network
Wireless
DOCSIS WAN
DOCSIS Status
Channels Selection
DOCSIS Log
Channels Selection
Scan
This page provides you with the ability to modify the initial scanning parameters used by the cable modem to find its network connection
Present Downstream Frequency
The data shown in the table below provides the downstream frequency to which the cable modem is tuned to at this time
Downstream Frequency
0 MHz
Upstream channel ID
This field below allows you to modify the upstream channel ID.
NOTE:Some CMTSs may not support this, though they all should.
Upstream channel ID
Frequency Start Value
This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect
Start Frequency
Upstream Channel Setting
This field below allows you to modify the channel the cable modem will use. Enter the new channel and click the button for it to take effect
Upstream Channel
