Wireless -- Advanced
This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used.
Click "Apply/Save" to configure the advanced wireless options.

Band:
Channel:
Current Channel:
Auto Channel Timer(min)
802.11n/EWC:
Bandwidth:
Current Bandwidth:
Control Sideband:
Current Control Sideband:
802.11n Rate:
802.11n Protection:
Support 802.11n Client Only:
RIFS Advertisement:
OBSS Coexistence:
RX Chain Power Save: Power Save status:
RX Chain Power Save Quiet Time:
RX Chain Power Save PPS:
54g™ Rate:
Multicast Rate:
Basic Rate:
Fragmentation Threshold:
RTS Threshold:
DTIM Interval:
Beacon Interval:
Global Max Clients:
XPress™ Technology:
54g™ Mode:
54g™ Protection:
Regulatory Mode:
Pre-Network Radar Check:
In-Network Radar Check:
TPC Mitigation(db):
Afterburner Technology: (Disable WMM for Selection)
Preamble Type:
Transmit Power:
WMM(Wi-Fi Multimedia):
WMM No Acknowledgement:
WMM APSD:
Iperf Support:
Video Error Correction:
Wireless Mode:
URE:
URE Mode:
STA Retry Time(sec):