Icon

LED Function

What do the coloured lights mean ?

Flashing green when powering up in progress.

Solid green when powered up successfully and ready for use.

Flashing red when an update is in progress. Do not power-off when flashing red.

Solid blue when the coax cable is properly connected.

Flashing blue when transmitting or receiving data over the coax connection.

Solid blue when successfully connected to WAN Ethernet or DSL.

Flashing blue when attempting to synchronize DSL.

Solid blue when your Internet service is ready to use.

Flashing blue when transmitting or receiving data over your Internet service.

Solid red when there is a problem with your Internet service.

Solid red while flashing blue when connected to test@test.

Flashing red when authentication has failed.

Off when TV service is not configured.

Solid blue when your TV service is ready for use.

Flashing blue when TV service is in use.

Solid red when there is a problem with your TV service.

Off when your wireless network is disabled.

Solid blue when your wireless network is ready for use.

Flashing blue when transmitting or receiving data over your wireless network.

Off when WPS (Wi-Fi Protected Setup) is disabled.

Solid green when WPS (Wi-Fi Protected Setup) is enabled and ready for use.

Flashing green when attempting to connect to a WPS-enabled wireless client.

Icon

Button Function

What do the buttons do ?

This button is not used.

Press and hold this button for 8-10 seconds, until the Wireless light turns on or off to enable or disable your wireless network.

Press and hold this button until the WPS (Wi-Fi Protected Setup) light starts flashing to enable WPS push-button pairing mode.